Model:6SR Stainless Steel

Submersible Pump

Applications
For water supply from wells or reservoirs.
For domestic use for civil and industrial applications.
For garden use and irrigation.
OPerating conditions
Maximum fluid temperature up to +35℃.
Maximum sand content:3%.
Maximum immersion:120m.
Minimum well diameter:6".
Motor and pump
Rewindable motor
Three-phase: 350V-415V/50Hz
Internal diameter of outlet
2.5" 3"
Warranty:1 year
(According to our general sales conditions).

COMPONENTS	MATERIAL
Pump casing	AISI 304SS/201SS
Outlets	Cast-iron
Inlets	Cast-iron
Strainer	AISI 304SS
Diffuser	PC
Impeller	POM
Pump shaft	AISI 304SS/201SS
Shaft coupling	AISI 304SS/201SS

Motor casing	AISI 304SS/201SS
Mechanical seal	Graphite-ceramic/TC
Top chock	Cast-Cu/Cast-iron
Motor shaft	AISI 304SS
Bearing	NSK/C&U
Seal lubricant oil	10#White Oil

Comparation/Feature	6SR	QS, QY and Others Pumps
1 .Multi-Purpose per Pump	Flow of 20-40m3/h	Different pumps with different flow levels
2.Wide-range Flow	No overloading within flow of 20-40m3/h.	Only working at rated flow point. Otherwise electric motors will be overloaded and short-lived.
3.Wide-range Head	Wide-range flow,small changed head	Only working at rated head point. Otherwise electric motors will be overloaded and short-lived .
4.Energy Efficiency	Design of wide head and full flow. Wide efficient areas. 20%~50% less electricity consumption than other pumps in case of deviation of head.	For application far from rated head points, there will be increase 1.2-2 times electricity consumption.
5.Deep Diving	Built-in pressure equilibrator and diving depth up to 150 meters.	Diving depth not exceeding 5 meters.
6.Wind-range Voltage	300V - 420V	360V-400V
7.Anti-sand perfomance	Eightfold performance better than 6SP one	Short-working life with sand-water
8.Compatibility	Motor made as per NEMA standard, matching with various 6-inch pumps.	Low commonality due to integrative structure between pumps and electric motors